Important notice about STEREO Behind

STEREO In-Situ and Radio Space Weather Beacon Data

Shown here are plots of the latest in-situ particle and fields data from the STEREO IMPACT and PLASTIC instruments, and radio data from SWAVES. The STEREO space weather beacon telemetry mode is a very low rate, highly compressed data stream broadcast by the spacecraft 24 hours per day. These data are used for space weather forecasting. Because the data are produced in real-time, the calibrations may not match those used for the final data product.

This page should automatically update every 5 minutes. Otherwise, use your browser's "reload" button to get the most recent plot.

Radial-Tangential-Normal (RTN) coordinates are defined such that the +X axis points from sun center through the satellite (radial), and the +Z axis points along the projection of the solar North pole (normal). The +Y axis completes the right-handed coordinate system, and points towards the solar West limb (tangential).

The data on this page include telemetry collected by the following organizations:

• NASA Deep Space Network Japan
• Amateur station DL0SHF, Kiel-Ronne, Germany
• AMSAT-DL/Bochum Observatory, Germany
• Johns Hopkins University Applied Physics Laboratory, Laurel, MD, USA

• Rutherford Appleton Laboratory: Chilbolton, UK
• Centre National d'Etudes Spatiales: Toulouse, France
• Korean Space Weather Center: Jeju, South Korea
• National Institute of Information and Communications Technology: Koganei, Japan

In addition, we wish to acknowledge

• Amateur station KA9Q, Phil Karn, for writing and donating the decoding software used at the ground stations.
• NOAA Space Weather Prediction Center for organizing and scheduling the ground station network.

Last Revised: Monday, 28-Oct-2024 14:35:02 EDT
Responsible NASA Official:
Privacy Policy and Important Notices
Accessibility

Webmaster: Apexa Patel